Reflecta SERIES 2500AFM Spezifikationen PDF herunterladen (Seite 87)

WEIN

PRO-SYNC

FLASHES & ACCESSORIES

300

EQUIPMENT LEASING AVAILABLE

PHOTO - VIDEO - PRO AUDIO

Private Channel Remote Controls

If you shoot weddings, events, industrial or other location work, Pro-Sync is for

you. A private channel remote control system,

Pro-Sync provides cordless,

omni-directional remote flash control with virtual immunity to interference.

Unlike radio frequency (RF) remote flash control systems, Pro-Sync uses state-

of-the-art coded infrared technology to fire remote flash units. Common sources

of radio interference, like cellular phones, pagers, and wireless microphones

(very common at weddings), can disrupt radio flash signals, but are no threat

to Pro-Sync. Because the Pro-Sync signal is encoded, the system cannot be triggered by any flash or light source.

PS500-1 Pro-Sync 1-Channel System with “H” Prong

One channel (includes transmitter and “H”-prong type receiver) private-protected system prevents interference from other photog

raphers’ flashes.

Receiver only responds to discrete transmitter pulse.

Operates at ranges up to 600´ indoors. Includes 10˝ miniplug-to-PC coiled cord for non-hot

shoe cameras.

Universal stainless steel mount clip.

• Transmitter: Color-coded On/Off switch. Battery saver circuit provides 5000 firings from two AA alkaline batteries. Ready light, open flash test

button. Locking shoe mount; triggers by hot shoe or via PC cord (supplied). Measures 2

⁄2 x 3 x 1

⁄2˝, weighs 3 oz. (less batteries).

• Receiver: “H”-prong and “PC”connectors. Two velcro strips for mounting when using PC cord. Measures 1

⁄2 x 2

⁄2 x 7/8˝, weighs 1.3 oz.

PS500-1 Pro-Sync

(WEPS5001)...........................................................................................................................................................................................209.95

The Transmitter: The Pro-Sync transmitter can be mounted

on, and fired by any standard camera hot shoe (or connected

to a PC terminal for off-shoe use). Just slide the compact

transmitter onto your camera and forget it; no cords, no

antenna, nothing to clip to your belt.

A pair of “AA” batteries in the transmitter provides power for

up to 5,000 shots, with recycle times averaging less than a

second; that’s faster than almost any flash, so your Pro-Sync is

up and ready when you are.

Each time you shoot, the transmitter fires, and an “explosion”

of coded infrared lights fills the room, bouncing off walls and

around corners. You can’t see the signal (neither can your

film), but the Pro-Sync receiver sure can.

The Receiver: Plugged into your remote flash, the Pro-Sync

receiver is in a “standby” mode, waiting for the transmitter signal.

Nothing else can trigger the receiver, not even a full-power

flash fired inches away. Pro-Sync receivers are incredibly sensitive

and can easily pick up the signal from behind backdrops, soft

boxes, even around a roomful of wedding guests. They work

indoors or out, with a maximum range of 600´ (indoors).

The Pro-Sync receiver draws its power from the flash to which

it is connected, so there are no batteries to change. Receivers

are available with either integral “H” prong or monoplug sync

connectors, so they connect directly, cordlessly, to most

professional flash units or power packs. For additional versatility,

each receiver also has a standard PC terminal.

Lets you use a Pro-Sync transmitter without giving up TTL flash! The Sync-Link frees your hot shoe or PC

terminal for a dedicated/TTL flash connection while using any Pro-Sync system. The tiny module velcros to your

on-camera flash and senses when it fires, then completes the circuit that triggers your Pro-Sync transmitter.

Sync-Link keeps your transmitter “outside the loop,” allowing for normal connection of flash to camera. Sync-Link

also adds on-camera flash/remote flash switching capability to single channel Pro-Sync systems.

(WESLMP)..........46.95

SYNC-LINK

PS500-1E Pro-Sync

1-Channel System with Monoplug

Same as PS500-1 except with monoplug (plus

PC) style receiver (W928120). For flash units

equipped with phono-plug style sync jacks.

WEPS5001E ................................................................234.95

PS500-2 Pro-Sync

2-Channel System with Monoplug

Same as the PS500-1 except it offers separate

channels to allow control over two separate

flash systems.

WEPS5002...................................................................319.95

PS500-2E Pro-Sync

1-Channel System with Monoplug

Same as above except with monoplug (plus

PC) style receiver (W928210). For flash units

equipped with phono-plug style sync jacks.

WEPS5002E ................................................................339.95

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 105 106

Kommentare zu diesen Handbüchern

Keine Kommentare

Reflecta SERIES 2500AFM Spezifikationen Seite 87

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Reflecta SERIES 2500AFM